Description

Getting started with myrobotlab - Having problems? Ask the nice people here.

Servo control not working with latest MRL release [SOLVED]

Hey once again; I have gotten the OpenCV to work on MRL once I updated it to a newer version, but I noticed that the Servo control does not work anymore for the newer releases. I am currently running off of the latest version of MRL (1695.20130913.0508) which is compatible with the full inmoov scripts but the servo services do not work. It is not a hardware problem because they work perfectly fine when I control them with an older verision of MRL (1131.20130504.0604). 

Beagleboard Black w/MRL

Anybody had any success getting MRL up and running on a BBB?  I'm stuck at trying to verify my java installation at the moment, so any pointers/helpful suggestions/handholding walkthroughs would be completely appreciated.

 

Help uploading my first experiment please? :D [SOLVED]

Hello guys i wanted to try the wireless piano (first time experementing with MRL) thats posted on the website by Alessandruino but i c/p code to python, i've installed arduino and jfugue extensions on MRL but and i've set my Arduino Mega2560 to COM4, Bps 9600, data bits 8, parity none, stop bits 1, flow control none but when i try to upload the example code on the board it says:

ps3 eye with mrl?? Please help!

hey all, ive been working on the InMoov robot for quite some time now, and now im working on getting the tracking and object recognition going in the program, but i cant seem to get the ps3 eye working with the opencv service inside mrl. I have tried it witha regular webcam and it works, but nothing shows up when i try conneting the ps3 eye. I have tried changing the input from the opencv to ps3eye in the opencv service, but still nothing shows up in the gui. It is not a problem with the ps3 eye, because when i test it with CL-Eye test it works perfectly fine. Thanks in advance guys!

Tutorial for InMoov Finger Starter problem

Hi,

I'm under the inpression. Nice job!

I have trayed to feel project base on InMoov Finger Starter tutorial. I made step by step as tutorial.

I sent sketch to arduino, start python script,  the syntezer recognized command, manual  comand   can control the servo.

Voise command "open hand" "close hand"are recognized correct  but servo didn't move.

what could hapened?  

I used  turnigy TG9g servo. Only this servo I have on hand 

Problem installing opencv

Hi

I have a problem when I try to install inmoov. when installing the download new compnent window stops at attempting to retrieve opencv info

 

About the joystick service ...

Hi,

I've made a little script for move my animatronic head with a joystick ( see attachement ) . It work well but for move the eyes, i must press the joystick's arrows for each degree . How must i do for make they move until i release the button ? 

Getting Started